CertiScan®
 
Product Family
 
Partnerships
Technical Specifications
 
CertiScan Reader (Model: DR406)
13.56 MHz Desktop Contactless RFID Reader (for use with Med-ic, Log-ic, eCAP ECM tags)
Read Range: 0 to 125mm (max 5 inches)
Antenna: Built-in loop antenna
Reading Time: Under 2 seconds
Internal Clock: Standard UTC 5 min per 6 months, calibrated using CertiScan calibration tag
Data Protocol: Manchester encoded, secure packet-based proprietary CertiScan protocol
Power Supply: Input 110-240V, output 5VDC, 1.5A (UL, CSA, TUV, CE listed)
Output: < 10mW, FCC compliant
Communication Interface: RS232 115Kbps, optional USB
Operating Environment: +5°C to +60°C (+45°F to +150°F)
Dimensions: 24.5cm x 16.5cm x 2.2cm
Med-ic Electronic Compliance Monitor (ECM)
Heat Sealable, Thin, Flexible, Active, Sensing, RFID Tag (up to 4 Billion unique ID's)
Number of Monitored Tablets: Up to 40 per tag (multiple tags per package allowed)
Time Resolution: Stored 1 minute
Time Accuracy: 2 minutes per month
Operating Environment: -5°C to +65°C
Power Source 3V lithium: button battery model CR2016 NOT listed EPA hazardous waste
Lifetime: 1 year from date of tag manufacture plus 1 year from date of packaging.
One time use.
Dimensions: 40 x 42 x 2 mm Weight under 5 g (1/6 oz)
Log-ic Temperature Sensor
Unique ID: using 13.56 MHz RFID and barcode
Life:2.5 Years Shelf / up to 1 year active
Programmable:Low-cost wireless temperature recorder
On board analysis: temperature distribution, excursions and statistics including MKT
Reading: 16 million readings
Time Resolution: Stored 1-240 minutes programmable
Time Accuracy: 2 minutes per month
Operating Environment: -40°C to +65°C
Power Source 3V lithium: button battery model CR2016 NOT listed EPA hazardous waste
Dimensions: 40 x 42 x 2 mm Weight under 5 g (1/6 oz)
Licensed to use as disposable or re-usable tag
FAA Air Cargo Safe
Waterproof (NEMA 6P/IP68 Certified)
EN12830 Class 1 Certified (±0.25°C from -30°C to +30°C)
Visual LED alarm, Start/Stop button
Works with CertiScan RFID wireless reader
CertiScan Software
Compliance Data Acquisition and Management Software
Requirements: Pentium II or higher, 256MB Ram, 50MB free disk space.
9-pin serial port or USB to serial when used with reader
OS: Windows 2000, Windows XP, Windows Vista
File Format: Secure, tamper-proof, available 21 CFR Part 11 compliant trial data file (*.tdf or *.ldf) Database Max 250,000 patient/medication records per trial data file
Export Data Format:CSV, XML
Event Listings
© 2010 Information Mediary Corporation (IMC) and Affiliates. All rights reserved.
IAP, eCAP, eCAP/Secure, and "Revolutionize Your Cold Chain" are trademarks of Intelligent Devices Incorporated and are used under license. XINK and InstaCure are trademarks of Acheson.
ECM, Log-ic, CertiScan, Med-ic and "Rx for the Third Millennium" are registered trademarks of Intelligent Devices Incorporated and are used Under license.